INSTALLATION TERMS AND CONDITIONS

Standard Installation & Conditions

Standard installation is defined as follows:

  • The fitting of the Charge Point on a brick or plaster wall, or to another suitable permanent structure.
  • Up to 10 meters of 6mm power cable, run and neatly clipped direct to the wall between the distribution board or electricity supply meter and the ChargePoint.
  • Routing of the cable through a drilled hole in a wall up to 500mm (20 inches) thick, where needed.
  • The fitting and testing of electrical connections and protections required for the ChargePoint.
  • Up to five meters of white plastic conduit to conceal interior wiring.
  • The installation of earth electrode in the vicinity of the ChargePoint or an additional PEN fault detection device.
  • To be carried out by one installer in compliance with BS 7671:2018 and IET Code of Practice for Electric Vehicle Charging Equipment Installation 3rd Edition.
  • It also assumes that correct electrical connections and protections are available on the property and that no civil works, electrical remedial works or any other trades are required.

Some conditions and limitations that you need to know about

  • The ChargePoint must be located in your designated off-street parking area and be fixed at a height where it can’t be hit by a vehicle.
  • We can’t, as part of the standard package, trench the cable underground or suspend it above ground – if something like this is required please contact us so that we can give you a quote in advance.
  • We can’t run a cable under floorboards or through ducting / ceiling voids/wall voids without a draw cord (to pull the cable through), or if the floorboards have not been lifted. We can’t take responsibility for reinstating flooring or other building materials wall voids after the cable has been laid.
  • Also note: Our Installers are not able to work in crawl spaces, on roofs or in lofts if it is deemed unsafe by them. Our Installers are not able to work in extreme weather (i.e. flooding or intense rain). If it is not safe to carry on, our Installers will do as much as they can and we will return at a later date.

Additional Charges

If the installation requires additional work outside of the standard installation (as defined above) then the customer will be required to pay our install partner directly for the additional work charges.

If you have any questions or would like to arrange a site survey simply click here to email us or call 0208 0162 264